In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset and clock enable bits, but is ungated and reset together with the VPUs. So we can't reset G1 or G2 separately, it may led to the system hang. Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data. Let imx8mq_vpu_power_notifier() do really vpu reset.
In the Linux kernel, the following vulnerability has been resolved: serial: Fix not set tty->port race condition Revert commit bfc467db60b7 ("serial: remove redundant tty_port_link_device()") because the tty_port_link_device() is not redundant: the tty->port has to be confured before we call uart_configure_port(), otherwise user-space can open console without TTY linked to the driver. This tty_port_link_device() was added explicitly to avoid this exact issue in commit fb2b90014d78 ("tty: link
In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: ptrace: Fix SVE writes on !SME systems When SVE is supported but SME is not supported, a ptrace write to the NT_ARM_SVE regset can place the tracee into an invalid state where (non-streaming) SVE register data is stored in FP_STATE_SVE format but TIF_SVE is clear. This can result in a later warning from fpsimd_restore_current_state(), e.g. WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_rest
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [
The Media Library Folders plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 8.3.6 via the delete_maxgalleria_media() and maxgalleria_rename_image() functions due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Author-level access and above, to delete or rename attachments owned by other users (including administrators). The rename flow also deletes all postmeta for the target attac
The Essential Addons for Elementor – Popular Elementor Templates & Widgets plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Info Box widget in all versions up to, and including, 6.5.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Mail Mint plugin for WordPress is vulnerable to blind SQL Injection via the 'forms', 'automation', 'email/templates', and 'contacts/import/tutorlms/map' API endpoints in all versions up to, and including, 1.19.2 . This is due to insufficient escaping on the user supplied 'order-by', 'order-type', and 'selectedCourses' parameters and lack of sufficient preparation on the existing SQL queries. This makes it possible for authenticated attackers, with administrator level access and above, to app
The Modula Image Gallery – Photo Grid & Video Gallery plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.13.6. This is due to the plugin not properly verifying that a user is authorized to modify specific posts before updating them via the REST API. This makes it possible for authenticated attackers, with contributor level access and above, to update the title, excerpt, and content of arbitrary posts by passing post IDs in the modulaImages field wh
The MP3 Audio Player – Music Player, Podcast Player & Radio by Sonaar plugin for WordPress is vulnerable to Server-Side Request Forgery in versions 5.3 to 5.10 via the 'load_lyrics_ajax_callback' function. This makes it possible for authenticated attackers, with author level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services.
The myCred plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'mycred_load_coupon' shortcode in all versions up to, and including, 2.9.7.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Smart Forms plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'rednao_smart_forms_get_campaigns' AJAX action in all versions up to, and including, 2.6.99. This makes it possible for authenticated attackers, with Subscriber-level access and above, to retrieve donation campaign data including campaign IDs and names.
The Scheduler Widget plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 0.1.6. This is due to the `scheduler_widget_ajax_save_event()` function lacking proper authorization checks and ownership verification when updating events. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify any event in the scheduler via the `id` parameter granted they have knowledge of the event ID.
The Press3D plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 3D Model Gutenberg block in all versions up to, and including, 1.0.2. This is due to the plugin failing to sanitize and validate the URL scheme when storing link URLs for 3D model blocks, allowing `javascript:` URLs. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages via the link URL parameter that will execute whenever a user clicks
The CallbackKiller service widget plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the cbk_save() function in all versions up to, and including, 1.2. This makes it possible for unauthenticated attackers to modify the plugin's site ID settings via the 'cbk_save_v1' AJAX action.
The Percent to Infograph plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `percent_to_graph` shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Simple Plyr plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'poster' parameter in the 'plyr' shortcode in all versions up to, and including, 0.0.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The UpMenu – Online ordering for restaurants plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'lang' attribute of the 'upmenu-menu' shortcode in all versions up to, and including, 3.1. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Sphere Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'width' parameter in the 'show_sphere_image' shortcode in all versions up to, and including, 1.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Ravelry Designs Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'layout' attribute of the 'sb_ravelry_designs' shortcode in all versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.