In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on
In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace
In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect
In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing
In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decodi
In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_
In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the sam
In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6
In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machin
In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved
In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an absolute path with convert_to_unix_name() and resolves it from AT_FDCWD via start_creating_path(), so a ".." component is walked from the real filesystem root and escapes the export. An authenticated client races a missing pa
OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.2 and 1.1.2, internal/cluster-gateway/server.go served caller-facing management APIs on the externally reachable agent listener without authentication, allowing network-reachable attackers to invoke /api/proxy/ and /api/exec/ operations, proxy the data-plane Kubernetes API, and execute commands in workload pods in multi-cluster deployments. This issue is fixed in versions 1.0.2 and 1.1.2.
Budibase is an open-source low-code platform. Prior to 3.39.30, the OIDC flow in packages/backend-core/src/middleware/passport/sso/oidc.ts resolved an email without getEmailVerified or an email_verified requirement, and packages/backend-core/src/middleware/passport/sso/sso.ts then used users.getGlobalUserByEmail as a fallback account-linking key. An attacker who can authenticate through a configured identity provider that asserts a victim email as unverified can have a fresh provider identity me
Budibase before 3.40.0 fails to properly sanitize S3 object keys, allowing authenticated builders to upload files with traversal sequences that are preserved during export. Attackers can craft filenames containing .. segments that escape the temporary directory during workspace export, writing arbitrary content to any path writable by the Budibase process.
luci-app-lxc contains an ACL inconsistency vulnerability that allows low-privileged authenticated LuCI users to access backend container management routes without proper authorization checks. Attackers can exploit path traversal via `/.%2E` in the `lxc_name` parameter to escape container directories and control host-side scripts executed through `lxc.hook.start-host`, achieving root code execution on the OpenWrt host.
filebrowser through 2.63.16 fails to properly restrict scope and permissions when self-signup is enabled with default CreateUserDir setting. Unauthenticated attackers can register accounts that inherit the server root scope with full create, modify, delete, rename, share, and download permissions, allowing unrestricted access to all files.
Vitest is a testing framework powered by Vite. Prior to versions 3.2.7, 4.1.10, and 5.0.0-beta.6, Browser Mode provider commands including upload, takeScreenshot, screenshotMatcher, stopChunkTrace, deleteTracing, and annotateTraces accept browser-supplied file paths without enforcing the allowWrite permission gate or confining paths to the project root. A client that can reach the Browser Mode API can read arbitrary local files, create or overwrite image and trace files, or delete files accessib
Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the mariadb.ts, mongo.ts, mysql.ts, postgres.ts, redis.ts, and libsql.ts Dokploy database service deployment functions pass user-controlled dockerImage fields unquoted into docker pull ${dockerImage} shell commands on the remote-server code path. This vulnerability is fixed in 0.29.13.
Dokploy is a free, self-hostable Platform as a Service (PaaS). In 0.28.8 and earlier, an authenticated user who can create or update file mounts for a service can inject shell metacharacters into filePath, causing Dokploy to execute attacker-controlled commands on the configured remote managed server over SSH. In the default deployment model, this yields direct remote host RCE from the web interface.