Security Feed

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix irq resource leak The interrupt handler is setup but only a few lines down if iio_trigger_register() fails the function returns without properly releasing the handler. Add cleanup goto to resolve resource leak. Detected by Smatch: drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn: 'irq' from request_threaded_irq() not released on lines: 1124.

In the Linux kernel, the following vulnerability has been resolved: gpib: lpvo_usb: fix memory leak on disconnect The driver iterates over the registered USB interfaces during GPIB attach and takes a reference to their USB devices until a match is found. These references are never released which leads to a memory leak when devices are disconnected. Fix the leak by dropping the unnecessary references.

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: Fix URB memory leak on submit failure When usb_submit_urb() fails in usbio_probe(), the previously allocated URB is never freed, causing a memory leak. Fix this by jumping to err_free_urb label to properly release the URB on the error path.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro, which expects hsotg->lock to be held since it does spin_unlock/spin_lock around the gadget driver callback invocation. However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating() without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined beh

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cl

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix NULL dereference in linedisp_release linedisp_release() currently retrieves the enclosing struct linedisp via to_linedisp(). That lookup depends on the attachment list, but the attachment may already have been removed before put_device() invokes the release callback. This can happen in linedisp_unregister(), and can also be reached from some linedisp_register() error paths. In that case, to_lined

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especi

In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_becom

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `res

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed.

In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix NULL pointer dereference when perf domain ID is not found dev_energymodel_nl_get_perf_domains_doit() calls em_perf_domain_get_by_id() but does not check the return value before passing it to __em_nl_get_pd_size(). When a caller supplies a non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL, and __em_nl_get_pd_size() immediately dereferences pd->cpus (struct offset 0x30), causing a NULL pointer dere

In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: prevent counter from being toggled multiple times Runtime PM counter is incremented / decremented each time the sysfs enable file is written to. If user writes 0 to the sysfs enable file multiple times, runtime PM usage count underflows, generating the following message. rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow! At the same time, hardware registers end up being accessed with

In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member The counter driver can use HW channels 1 and 2, while the PWM driver can use HW channels 0, 1, 2, 3, 4, 6, 7. The dev member is assigned both by the counter driver and the PWM driver for channels 1 and 2, to their own struct device instance, overwriting the previous value. The sub-drivers race to assign their own struct device pointer to the same struct rz_

In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cl

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_ppe: avoid NULL deref when gmac0 is disabled If the gmac0 is disabled, the precheck for a valid ingress device will cause a NULL pointer deref and crash the system. This happens because eth->netdev[0] will be NULL but the code will directly try to access netdev_ops. Instead of just checking for the first net_device, it must be checked if any of the mtk_eth net_devices is matching the netdev_ops of the ingre