CVEs

In Zephyr's Bluetooth Mesh PB-ADV provisioning bearer (subsys/bluetooth/mesh/pb_adv.c), prov_msg_recv() rescheduled the provisioning protocol watchdog timer unconditionally at the top of the function, before the FCS check and before the ADV_LINK_INVALID check. Once a provisioning attempt fails, prov_failed() sets ADV_LINK_INVALID and the only recovery path is the protocol timer firing (protocol_timeout -> prov_link_close -> close_link -> reset_adv_link and re-enabling of scanning and the unprovi

The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled. As a result, a uart_configure() request with an unsupported configuration

The CONFIG_USERSPACE verification handler for the k_thread_name_copy() system call (z_vrfy_k_thread_name_copy() in kernel/thread.c) calls k_object_find() on the caller-supplied thread pointer and then dereferences the returned struct k_object without checking it for NULL. k_object_find() returns NULL whenever the supplied pointer is not a registered (static or dynamic) kernel object. The pre-fix guard tested thread == NULL instead of ko == NULL, so an unprivileged user-mode thread that invokes

The nRF70 Wi-Fi driver's power-save event handler nrf_wifi_event_proc_get_power_save_info() in drivers/wifi/nrf_wifi/src/wifi_mgmt.c copied TWT (Target Wake Time) flow entries from an nrf_wifi_umac_event_power_save_info event into the fixed-size twt_flows[WIFI_MAX_TWT_FLOWS] (8-element) array of a caller-supplied struct wifi_ps_config, looping over event-provided num_twt_flows without validating it against WIFI_MAX_TWT_FLOWS or checking event_len. When num_twt_flows exceeds 8, the handler writes

In Zephyr's experimental USB host stack (CONFIG_USB_HOST_STACK), usbh_device_disconnect() (subsys/usb/host/usbh_device.c) freed the root usb_device slab object without clearing the cached pointer ctx->root. The bus removal handler dev_removed_handler() (subsys/usb/host/usbh_core.c) decides what to tear down solely from ctx->root, checking only that it is non-NULL. Because UHC controller drivers (e.g. uhc_max3421e, uhc_mcux_common) synthesize UHC_EVT_DEV_REMOVED directly from physical bus line s

The Bluetooth BAP Broadcast Assistant GATT client in subsys/bluetooth/audio/bap_broadcast_assistant.c reassembled remote Broadcast Receive State data into a single file-static net_buf_simple (att_buf, BT_ATT_MAX_ATTRIBUTE_LEN = 512 bytes) shared by all connection instances, while the BUSY flag, long-read handle, and reset/offset state were per-connection. When the device acts as a Broadcast Assistant connected to multiple Scan Delegator peripherals, notification and long-read callbacks from dif

The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver threa

The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a ref

The Zephyr net_buf library (lib/net_buf/buf.c) manipulated both of its reference counts -- the per-header buf->ref and the per-data-block ref_count at the start of each variable/heap data allocation -- with plain non-atomic C operators (buf->ref++, if (--buf->ref > 0), if (--(*ref_count))). The API is documented as self-synchronizing: callers may share one buffer across threads (e.g. via k_fifo) and each holder independently calls net_buf_unref() with no surrounding lock. Under true concurrency

Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buff

mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data =

The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadloc

The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME is 255, so the check is always false; the function then memcpy'd up to 255 name bytes and the lookup/readdir paths advanced traversal by an unvalidated de_rec_len. Each directory block is read into a block_size-sized slab

The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining th

Zephyr's IPv6 Neighbor Discovery send paths (net_ipv6_send_na, net_ipv6_send_ns, net_ipv6_send_rs in subsys/net/ip/ipv6_nbr.c) updated the per-interface ICMP-sent statistics by calling net_pkt_iface(pkt) after net_send_data(pkt) had already returned successfully. On the success path the network stack owns and releases the packet's reference (the L2/driver send unrefs it, e.g. ethernet_send -> net_pkt_unref), so for a freshly allocated packet with refcount 1 the net_pkt slab block can be freed be

In Zephyr's native IPv4 stack, icmpv4_handle_echo_request() in subsys/net/ip/icmpv4.c builds an echo-reply packet (reply), hands it to net_try_send_data(), and then, on success, calls net_stats_update_icmp_sent(net_pkt_iface(reply)). net_try_send_data() transfers ownership of reply to the TX path (net_if_try_queue_tx -> net_if_tx -> L2/driver send, or the asynchronous net_if_tx_thread), which can unref it to refcount 0 and return the struct net_pkt to its slab (net_pkt_unref -> k_mem_slab_free)

subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent packet. The send path (net_try_send_data -> net_if_tx) unreferences and may free the packet back to its memory slab before returning — synchronously in the RX thread when no TX queue is configured (CONFIG_NET_TC_TX_COUN